Prerequisites

To run the Gerrit service, the following requirement must be met on the host:

  • JRE, version 1.8 Download

    Gerrit is not yet compatible with Java 9 or newer at this time.

By default, Gerrit uses NoteDB as the storage backend. (If desired, you can optionally use an external database such as MySQL or PostgreSQL.)

Configure Java for Strong Cryptography

Support for extra strength cryptographic ciphers: AES128CTR, AES256CTR, ARCFOUR256, and ARCFOUR128 can be enabled by downloading the Java Cryptography Extension (JCE) Unlimited Strength Jurisdiction Policy Files from Oracle and installing them into your JRE.

Note
Installing JCE extensions is optional and export restrictions may apply.
  1. Download the unlimited strength JCE policy files.

  2. Uncompress and extract the downloaded file.

    The downloaded file contains the following files:

    README.txt

    Information about JCE and installation guide

    local_policy.jar

    Unlimited strength local policy file

    US_export_policy.jar

    Unlimited strength US export policy file

  3. Install the unlimited strength policy JAR files by following instructions found in README.txt.

Download Gerrit

Current and past binary releases of Gerrit can be obtained from the Gerrit Releases site.

Download any current *.war package. The war will be referred to as gerrit.war from this point forward, so you may find it easier to rename the downloaded file.

If you would prefer to build Gerrit directly from source, review the notes under developer setup.

Database Setup

During the init phase of Gerrit you will need to specify which database to use.

H2

If you choose H2, Gerrit will automatically set up the embedded H2 database as backend so no set up or configuration is necessary.

Using the embedded H2 database is the easiest way to get a Gerrit site up and running, making it ideal for proof of concepts or small team servers. On the flip side, H2 is not the recommended option for large corporate installations when using ReviewDb. This is because there is no easy way to interact with the database while Gerrit is offline, it’s not easy to backup the data, and it’s not possible to set up H2 in a load balanced/hotswap configuration.

If this option interests you, you might want to consider the quick guide.

Apache Derby

If Derby is selected, Gerrit will automatically set up the embedded Derby database as backend so no set up or configuration is necessary.

Currently only support for embedded mode is added. There are two other deployment options for Apache Derby that can be added later:

PostgreSQL

This option is more complicated than the H2 option but is recommended for larger installations. It’s the database backend with the largest userbase in the Gerrit community.

Create a user for the web application within PostgreSQL, assign it a password, create a database to store the metadata, and grant the user full rights on the newly created database:

  $ createuser --username=postgres -RDIElPS gerrit
  $ createdb --username=postgres -E UTF-8 -O gerrit reviewdb

Visit PostgreSQL’s documentation for further information regarding using PostgreSQL.

MySQL

Requirements: MySQL version 5.1 or later.

This option is also more complicated than the H2 option. Just as with PostgreSQL it’s also recommended for larger installations.

Create a user for the web application within the database, assign it a password, create a database, and give the newly created user full rights on it:

  mysql

  CREATE USER 'gerrit'@'localhost' IDENTIFIED BY 'secret';
  CREATE DATABASE reviewdb DEFAULT CHARACTER SET 'utf8';
  GRANT ALL ON reviewdb.* TO 'gerrit'@'localhost';
  FLUSH PRIVILEGES;

Visit MySQL’s documentation for further information regarding using MySQL.

MariaDB

Requirements: MariaDB version 5.5 or later.

Refer to MySQL section above how to create MariaDB database.

Visit MariaDB’s documentation for further information regarding using MariaDB.

Oracle

PostgreSQL or H2 is the recommended database for Gerrit Code Review. Oracle is supported for environments where running on an existing Oracle installation simplifies administrative overheads, such as database backups.

Create a user for the web application within sqlplus, assign it a password, and grant the user full rights on the newly created database:

  SQL> create user gerrit identified by secret_password default tablespace users;
  SQL> grant connect, resources to gerrit;

JDBC driver ojdbc6.jar must be obtained from your Oracle distribution. Gerrit initialization process tries to copy it from a known location:

/u01/app/oracle/product/11.2.0/xe/jdbc/lib/ojdbc6.jar

If this file can not be located at this place, then the alternative location can be provided.

Instance name is the Oracle SID. Sample database section in $site_path/etc/gerrit.config:

[database]
        type = oracle
        instance = xe
        hostname = localhost
        username = gerrit
        port = 1521

Sample database section in $site_path/etc/secure.config:

[database]
        password = secret_password

SAP MaxDB

SAP MaxDB is a supported database for running Gerrit Code Review. However it is recommended only for environments where you intend to run Gerrit on an existing MaxDB installation to reduce administrative overhead.

In the MaxDB studio or using the SQLCLI command line interface create a user 'gerrit' with the user class 'RESOURCE' and a password <secret password>. This will also create an associated schema on the database.

To run Gerrit on MaxDB, you need to obtain the MaxDB JDBC driver. It can be found in your MaxDB installation at the following location:

  • on Windows 64bit at "C:\Program Files\sdb\MaxDB\runtime\jar\sapdbc.jar"

  • on Linux at "/opt/sdb/MaxDB/runtime/jar/sapdbc.jar"

It needs to be stored in the 'lib' folder of the review site.

In the following sample database section it is assumed that the database name is 'reviewdb' and the database is installed on localhost:

In $site_path/etc/gerrit.config:

[database]
        type = maxdb
        database = reviewdb
        hostname = localhost
        username = gerrit

In $site_path/etc/secure.config:

[database]
        password = <secret password>

Visit SAP MaxDB’s documentation for further information regarding using SAP MaxDB.

DB2

IBM DB2 is a supported database for running Gerrit Code Review. However it is recommended only for environments where you intend to run Gerrit on an existing DB2 installation to reduce administrative overhead.

Create a system wide user for the Gerrit application, and grant the user full rights on the newly created database:

  db2 => create database gerrit
  db2 => connect to gerrit
  db2 => grant connect,accessctrl,dataaccess,dbadm,secadm on database to gerrit;

JDBC driver db2jcc4.jar and db2jcc_license_cu.jar must be obtained from your DB2 distribution. Gerrit initialization process tries to copy it from a known location:

/opt/ibm/db2/V10.5/java/db2jcc4.jar
/opt/ibm/db2/V10.5/java/db2jcc_license_cu.jar

If these files cannot be located at this place, then an alternative location can be provided during init step execution.

Sample database section in $site_path/etc/gerrit.config:

[database]
        type = db2
        database = gerrit
        hostname = localhost
        username = gerrit
        port = 50001

Sample database section in $site_path/etc/secure.config:

[database]
        password = secret_password

SAP HANA

SAP HANA is a supported database for running Gerrit Code Review. However it is recommended only for environments where you intend to run Gerrit on an existing HANA installation to reduce administrative overhead.

In the HANA studio or the SAP HANA Web-based Development Workbench create a user 'GERRIT2' with the role 'RESTRICTED_USER_JDBC_ACCESS' and a password <secret password>. This will also create an associated schema on the database. As this user would be required to change the password upon first login you might want to to disable the password lifetime check by executing 'ALTER USER GERRIT2 DISABLE PASSWORD LIFETIME'.

To run Gerrit on HANA, you need to obtain the HANA JDBC driver. It can be found as described here. It needs to be stored in the 'lib' folder of the review site.

In the following sample database section it is assumed that HANA is running on the host 'hana.host' and listening on port '4242' where a schema/user GERRIT2 was created:

In $site_path/etc/gerrit.config:

[database]
        type = hana
        hostname = hana.host
        port = 4242
        username = GERRIT2

In order to configure a specific database in a multi-database environment (MDC) the database name has to be specified additionally:

In $site_path/etc/gerrit.config:

[database]
        type = hana
        hostname = hana.host
        database = tdb1
        port = 4242
        username = GERRIT2

In $site_path/etc/secure.config:

[database]
        password = <secret password>

Visit SAP HANA’s documentation for further information regarding using SAP HANA.

Initialize the Site

Gerrit stores configuration files, the server’s SSH keys, and the managed Git repositories under a local directory, typically referred to as '$site_path'. If the embedded H2 database is being used, its data files will also be stored under this directory.

You also have to decide where to store your server side git repositories. This can either be a relative path under '$site_path' or an absolute path anywhere on your server system. You have to choose a place before commencing your init phase.

Initialize a new site directory by running the init command, passing the path of the site directory to be created as an argument to the '-d' option. Its recommended that Gerrit Code Review be given its own user account on the host system:

  sudo adduser gerrit
  sudo su gerrit

  java -jar gerrit.war init -d /path/to/your/gerrit_application_directory
Note
If you choose a location where your new user doesn’t have any privileges, you may have to manually create the directory first and then give ownership of that location to the 'gerrit' user.

If run from an interactive terminal, the init command will prompt through a series of configuration questions, including gathering information about the database created above. If the terminal is not interactive, running the init command will choose some reasonable default selections, and will use the embedded H2 database. Once the init phase is complete, you can review your settings in the file '$site_path/etc/gerrit.config'.

When running the init command, additional JARs might be downloaded to support optional selected functionality. If a download fails a URL will be displayed and init will wait for the user to manually download the JAR and store it in the target location.

When the init phase is complete, the daemon will be automatically started in the background and your web browser will open to the site:

  Initialized /home/gerrit/review_site
  Executing /home/gerrit/review_site/bin/gerrit.sh start
  Starting Gerrit Code Review: OK
  Waiting for server to start ... OK
  Opening browser ...

When the browser opens, sign in to Gerrit through the web interface. The first user to sign-in and register an account will be automatically placed into the fully privileged Administrators group, permitting server management over the web and over SSH. Subsequent users will be automatically registered as unprivileged users.

Installation Complete

Your base Gerrit server is now installed and running. You’re now ready to either set up more projects or start working with the projects you’ve already imported.

Project Setup

See Project Configuration for further details on how to register a new project with Gerrit. This step is necessary if existing Git repositories were not imported during 'init'.

Start/Stop Daemon

To control the Gerrit Code Review daemon that is running in the background, use the rc.d style start script created by 'init':

  review_site/bin/gerrit.sh start
  review_site/bin/gerrit.sh stop
  review_site/bin/gerrit.sh restart

('Optional') Configure the daemon to automatically start and stop with the operating system.

Uncomment the following 3 lines in the '$site_path/bin/gerrit.sh' script:

 chkconfig: 3 99 99
 description: Gerrit Code Review
 processname: gerrit

Then link the gerrit.sh script into rc3.d:

  sudo ln -snf `pwd`/review_site/bin/gerrit.sh /etc/init.d/gerrit
  sudo ln -snf /etc/init.d/gerrit /etc/rc3.d/S90gerrit

('Optional') To enable autocompletion of the gerrit.sh commands, install autocompletion from the /contrib/bash_completion script. Refer to the script’s header comments for installation instructions.

To install Gerrit into an existing servlet container instead of using the embedded Jetty server, see J2EE installation.

Installation on Windows

The ssh-keygen command must be available during the init phase to generate SSH host keys. If you have Git for Windows installed, start Command Prompt and temporary add directory with ssh-keygen to the PATH environment variable just before running init command:

PATH=%PATH%;c:\Program Files\Git\usr\bin

Please note that the path in the above example must not be double-quoted.

To run the daemon after site initialization execute:

cd C:\MY\GERRIT\SITE
java.exe -jar bin\gerrit.war daemon --console-log

To stop the daemon press Ctrl+C.

Install the daemon as Windows Service

To install Gerrit as Windows Service use the Apache Commons Daemon Procrun.

Sample install command:

prunsrv.exe //IS//Gerrit --DisplayName="Gerrit Code Review" --Startup=auto ^
      --Jvm="C:\Program Files\Java\jre1.8.0_65\bin\server\jvm.dll" ^
      --Classpath=C:\MY\GERRIT\SITE\bin\gerrit.war ^
      --LogPath=C:\MY\GERRIT\SITE\logs ^
      --StartPath=C:\MY\GERRIT\SITE ^
      --StartMode=jvm --StopMode=jvm ^
      --StartClass=com.google.gerrit.launcher.GerritLauncher --StartMethod=daemonStart ^
      --StopClass=com.google.gerrit.launcher.GerritLauncher --StopMethod=daemonStop ^
      ++DependsOn=postgresql-x64-9.4

Site Customization

Gerrit Code Review supports some site-specific customization options. For more information, see the related topics in this manual:

Anonymous Access

Exporting the Git repository directory (gerrit.basePath) over the anonymous, unencrypted git:// protocol is more efficient than Gerrit’s internal SSH daemon. See the git-daemon documentation for details on how to configure this if anonymous access is desired.

Plugins

Place Gerrit plugins in the review_site/plugins directory to have them loaded on Gerrit startup.